Sunday, October 11, 2015

Rode to Ottawa

My buddy Ron invited Lou and I to ride with him and his dog,  Mia on what turned out to be a rainy day.  We stayed dry until the ride home, but it could have been much worse.

Mia seemed to enjoy the ride, in Ron's side car rig.  They camped overnight a couple of nights and we had a nice day trip.

New chain and sprockets

The previous owner had installed a 17 tooth front sprocket which was still in good shape, but the chain had two master links and was badly stretched.  I purchased JT sprockets from Dennis Kirk and a 100 link JT x-ring chain from an eBay seller.  I had to get a clip master link because the chain came with a rivet master.  Gearing is still 17/40.

I trimmed the extra tabs off of the swingarm, remnants from the chain guard which has gone missing.

Saturday, September 12, 2015

New seat cover!

I found a guy on ebay who make motorcycle seat covers in Southern Illinois.  He was willing to make a new cover based on my old seat cover, and I had had him make two (I have two seat pans).



Wednesday, September 9, 2015

Swapped the gas tank

I found a matching gas tank on ebay that was pulled from a Canadian KZ400J.  I was growing tired of the 'patina' (dents) on my bike's tank so I purchased this one which looks much nicer.

Stopped at the Shell station to top her up
This picture nicely shows the only dent.

Tuesday, September 1, 2015

New rear suspension

I have always heard that new shocks and springs are one of the best upgrades you can make to a motorcycle.  Now I must agree.


Sunday, July 26, 2015

Tachometer drive block-off

Today at work, Lou and I cleaned prepped and filled the tach drive fitting with Alumalloy.




Friday, July 24, 2015

Jetting Analysis w/ O2 Sensor and A.F.R. meter

When we rebuilt the carbs, we had installed drilled main jets and larger pilots because we were removing the airbox and installing a 4 into 1 exhaust.

The engine was obviously running very rich, which was proven by the O2 sensor and A.F.R. meter.  We replaced both coils after trying to clean a corroded connection on one of them, and the mixture was still very rich.

After a bunch of test runs with various jets and needle positions, Lou figured out that the needles from the rebuild kit were shaped wrong.  He had me swap the stock needles back in, which improved the mixture significantly.  Now on the lean side, we shimmed the needles with .56mm which helped, but not enough.  Re-jetting to stock mains and pilots with .63mm shim washers did the trick.  It's like a different motorcycle now!

Fitted with Lou's O2 sensor and A.F.R. meter
Lou's guitar string method for needle shimming
The guitar string keeps the needle loose under the slide clamp