Apparently they can't call it Mods vs. Rockers anymore, but there was a handful of scooters accompanying tons of bikes. Lou and I had to work today (Ron snagged the day off) so we met up early, had breakfast at the Fullerton restaurant and rode the long way to Delilah's.
Sunday, July 24, 2016
Saturday, June 4, 2016
Rode to Economy Cycle and Analog Motorcycles
Yesterday, I rode to Waukegan for the Analog Motorcycle open house (party). It wasn't too far out of the way to stop in at Economy Cycle, where I purchased two carb kits for the RD. John at Economy Cycle told me that ignition points are no longer being manufactured, which is very noteworthy.
![]() |
| I have purchased from Economy before but this was my first time there. |
![]() |
| Resting comfortably after a hard, slow ride in traffic. |
![]() |
| A nice antique BMW that arrived just before I left. |
![]() |
| This company, Janus Motorcycles, builds their little Chinese-powered bikes in IN. |
![]() |
| IMO, their best asset is their aluminium gas tanks. |
![]() |
| If I was in the market for a thumper, then I would consider Royal Enfield. But. |
![]() |
| Possibly my favorite bike there, even though it's just a decoration in the bed of a '57 Ford. |
Sunday, October 11, 2015
Rode to Ottawa
My buddy Ron invited Lou and I to ride with him and his dog, Mia on what turned out to be a rainy day. We stayed dry until the ride home, but it could have been much worse.
Mia seemed to enjoy the ride, in Ron's side car rig. They camped overnight a couple of nights and we had a nice day trip.
New chain and sprockets
The previous owner had installed a 17 tooth front sprocket which was still in good shape, but the chain had two master links and was badly stretched. I purchased JT sprockets from Dennis Kirk and a 100 link JT x-ring chain from an eBay seller. I had to get a clip master link because the chain came with a rivet master. Gearing is still 17/40.
I trimmed the extra tabs off of the swingarm, remnants from the chain guard which has gone missing.
Saturday, September 12, 2015
New seat cover!
I found a guy on ebay who make motorcycle seat covers in Southern Illinois. He was willing to make a new cover based on my old seat cover, and I had had him make two (I have two seat pans).
![]() |
![]() |
Wednesday, September 9, 2015
Swapped the gas tank
I found a matching gas tank on ebay that was pulled from a Canadian KZ400J. I was growing tired of the 'patina' (dents) on my bike's tank so I purchased this one which looks much nicer.
![]() |
| Stopped at the Shell station to top her up |
![]() |
| This picture nicely shows the only dent. |
Tuesday, September 1, 2015
New rear suspension
I have always heard that new shocks and springs are one of the best upgrades you can make to a motorcycle. Now I must agree.
![]() |
Sunday, July 26, 2015
Friday, July 24, 2015
Jetting Analysis w/ O2 Sensor and A.F.R. meter
When we rebuilt the carbs, we had installed drilled main jets and larger pilots because we were removing the airbox and installing a 4 into 1 exhaust.
The engine was obviously running very rich, which was proven by the O2 sensor and A.F.R. meter. We replaced both coils after trying to clean a corroded connection on one of them, and the mixture was still very rich.
After a bunch of test runs with various jets and needle positions, Lou figured out that the needles from the rebuild kit were shaped wrong. He had me swap the stock needles back in, which improved the mixture significantly. Now on the lean side, we shimmed the needles with .56mm which helped, but not enough. Re-jetting to stock mains and pilots with .63mm shim washers did the trick. It's like a different motorcycle now!
![]() |
| Fitted with Lou's O2 sensor and A.F.R. meter |
![]() |
| Lou's guitar string method for needle shimming |
![]() |
| The guitar string keeps the needle loose under the slide clamp |
Wednesday, July 15, 2015
Installed new intake boots and synchronized carbs
Today the bike got new intake boots from Z1 Enterprises and a carb sync performed by Lou. I did not think there was enough time to sync the carbs, but Lou pulled out off quickly and we both made it to work on time.
![]() |
| This 33-year-old motorcycle deserves new rubber boots. |
![]() |
| Available at Z1 Enterprises |
![]() |
| Lou, calibrating the electronic sync tool that he designed and built |
Tuesday, July 14, 2015
Compression check, etc...
Today Lou and I did a compression check and then I re-checked the fuel levels in the carburetor bowls. We also re-checked the intakes for leaks and confirmed that they are still leaking. I have a new set of intake boots from Z1 Enterprises which I will install very soon.
The engine passed the compression test with 177-195 psi in all four cylinders. Number 1 had 195 psi and the rest were between 177 and 187, if my memory serves correctly. Lou took his notes with when he left, probably because he was afraid they would get lost in my garage.
![]() |
| Carb 1 |
![]() |
| Carb 2 |
![]() |
| Carb 3 |
![]() |
| Carb 4 |
![]() |
| I used a lawnmower gas tank to run the engine for warming up prior to the compression check. |
![]() |
| Cylinders 3 and 4 had a better intake seal and are badly carbon-fouled because our jetting is too rich. |
Thursday, July 9, 2015
Top clamp modification
This should have been done shortly after installing the clip-on bars. My friend Lou has done four of these over the years; make that five! He filled in the holes by MIG welding them but a welder recommended JB Weld to me and that is what I used. Time will tell if that was good or bad advice...
![]() |
| Lou in action with the hack saw |
![]() |
| Hacked |
![]() |
| Just prior to soda-blasting |
![]() |
| After soda-blasting |
![]() |
| Curing in the shed after painting |
Tuesday, June 30, 2015
Lowered ignition switch
I misplaced my keys and searched everywhere without any luck, so I removed the ignition switch. That night while I was at work, my wife called and told me that she had found the keys! This morning, I reinstalled the switch with longer bolts and stand-offs in order to make it more flush with the top clamp. My buddy pointed out that the fork lock will not work with the switch lowered, but it wasn't working anyway. When we installed the fork brace we had shortened the steering travel, so the steering locking point is never reached. He told me too grind a slot for the lock but I never had.
![]() |
| (Before) |
![]() |
| (After) |
![]() |
Sunday, April 19, 2015
First Spring ride
I cleaned out my storage unit and took the KZ for a Spring ride today. The bike started right up and ran well.
![]() |
Thursday, May 15, 2014
Swapped tank and tail
When I purchased the bike, the PO gave me a bunch of parts from another A-model 550. I didn't get the red side covers, but I like the way it looks with the red tank/tail and black sides.
Subscribe to:
Posts (Atom)







































